HGI Commercial Industrial Floor Type Quick Freezing Air Cooler (EF)
Air cooler with fluorine
EA series commercial angle-type air cooler
EC series commercial double side air cooler
EE series commercial double side blow air cooler
EH series commercial high-efficiency ceilingtype air cooler
ED series industrial double side blow air cooler
EL series industrial ceiling-type air cooler
EN series large ceiling-type air cooler
EF series floor type quick freezing air cooler
EW series water defrosting ceiling-type air cooler
Refrigeration capacity correction coefficient and selection
guide of air cooler with fluorine
Air cooler with ethylene glycol
ECG series commercial dual discharge air cooler with ethylene glycol
EHG series commercial ceilingtype air cooler with ethylene glycol
ECG series industrial dual discharge air cooler with ethylene glycol
ELG seriesindustrial ciling type air cooler with ethylene glycol
Condenser products
CL series vertical side mounted condenser
CP series horizontal plate-type condenser
CV series V-type condenser
Heat exchange correction cofficient and selection guide of condensers
I. Product Overview:
EF series air coolers are mainly used for quick-freezing or low-temperature quick-freezing cold store
1. Enclosure: High-quality galvanized steel plate sprayed with powder coating (silver gray RAL 9006), with desirable corrosion
resistance; plates on both sides are designed with hinged structure, which is convenient to operate;
2. Double water tray design: The outer water tray is designed with edge structure with angle, which makes the water drain
smoothly without any dead angle; the inner water tray is designed with sink structure made of aluminum plate, and the
condensed water or defrost water is directly discharged into the drainage outlet of the outer water tray through the inner water
tray;
3. Designed with overall stretching large arc high air tube, it has the characteristics of excellent air guiding effect.
4. Coil: The aligned tube pattern 50 X 50 mm features large heat transfer area, low heat transfer temperature diference;
5. Corrugated aluminum sheet made of hydrophilic aluminum foil, with the sheet spacing of 6.0mm, 9.0mm and 12.0mm to meet
diferent operation requirements;
6. Fan: The fan with blowing air and operating temperature of -45 °C, which is equipped with a motor with higher power and
higher wind pressure, to ensure the residual pressure outside the machine, reduce the wind speed on the surface of the food,
lower dry consumption, and improve the quality of food freezing;
7. Defrosting: The electric defrosting is adopted in the standard manner, and the stainless steel heating tubes are distributed in
the coil fins and the inner water tray, which can bring about desirable defrosting effect; the heating tube hole in thecoil is
equipped with an aluminum sleeve to improve the eficiency of defrosting effect;
8. The IP65 waterproof junction box and waterproof connectors are used, with better waterproofing; the fan and the heating pipe
are wired separately, which can lead to high reliability;
9. The outlet of the air cooler is equipped with a needle valve, which is convenient for users to test the pressure;
10. It is subjected to strict pressure test at the pressure of 23bar;
11. The expansion valves, heating band of fan tube and other parts can be pre-installed according to customer's needs;
12. It is compatible with R404A, R507A, R448A, R449A, R22 and other refrigerants.