HGI Commercial Vertical Side-Mounted Condenser Fan for Cold Room (CL)
Air cooler with fluorine
EA series commercial angle-type air cooler
EC series commercial double side air cooler
EE series commercial double side blow air cooler
EH series commercial high-efficiency ceilingtype air cooler
ED series industrial double side blow air cooler
EL series industrial ceiling-type air cooler
EN series large ceiling-type air cooler
EF series floor type quick freezing air cooler
EW series water defrosting ceiling-type air cooler
Refrigeration capacity correction coefficient and selection
guide of air cooler with fluorine
Air cooler with ethylene glycol
ECG series commercial dual discharge air cooler with ethylene glycol
EHG series commercial ceilingtype air cooler with ethylene glycol
ECG series industrial dual discharge air cooler with ethylene glycol
ELG seriesindustrial ciling type air cooler with ethylene glycol
Condenser products
CL series vertical side mounted condenser
CP series horizontal plate-type condenser
CV series V-type condenser
Heat exchange correction cofficient and selection guide of condensers
I. Product Overview:
CL series condenser is designed with vertical side-mounted structure,air intake on the rear side and air outlet on the front side;
It is mainly used in air-cooled condensing units where the condenserand compressor are required to be installed separately.
This series of products has the following characteristics:
1. With vertical side- mounted structure, the condenser can be installed in a stacked manner to save installation space.
2. Enclosure: High-quality galvanized steel plate sprayed with powder coating (silver gray RAL9006); the fan tube is designed with overall
stretching large rounded high air tube, it has the characteristics of ecellent air guiding effect, low noise and aesthetic appearance.
3. The side sheet of the heat exchanger is made of aluminum plate, which can effectively protect the copper tube;
4. Coil: Tube diameter φ9.5, female thread copper pipe, tube spacing 25X 21.65 in triangular arrangement, high heat
exchange eficiency.
5. Corrugated aluminum sheet made of hydrophilic aluminum foil is adopted, with the sheet spacing of 2.1mm;
6. Fan: It is design with standard 3P/380V/50Hz power supply, ftted with φ400, φ500 and φ630 external rotor fans, 1-3
fans in one row, 4-6-8 fans in double rows; 4-pole motor is adopted as the standard component.
7. The test pressure of the product is 32bar.
8. It is compatible with R404A, R507A, R448A, R449A, R134a, R22 and other refrigerants.